spridgets
[Top] [All Lists]

Re: [Spridgets] NMC - PT Cruiser No Go

To: <dbl@chicagolandmgclub.com>
Subject: Re: [Spridgets] NMC - PT Cruiser No Go
From: "Chris King" <cbking@alum.rpi.edu>
Date: Thu, 12 Mar 2009 05:12:26 -0700
Why not? It's easier than a Spridget gearbox. You don't have to pull the
motor, and you have access both top and bottom. I had my Tercel box out
in about 30 minutes. :)
 
-=Chris

Chris King
http://home.comcast.net/~kvcbk/ 

 <-----Original Message----->

                 From: David Lieb [dbl@chicagolandmgclub.com]
Sent: 3/12/2009 6:47:14 AM
To: thcollin@mtu.edu;spridgets@autox.team.net
Subject: Re: [Spridgets] NMC - PT Cruiser No Go 

>>> What's the verdict??? Do you know yet? 

The transmission guy assures me that, since it slips effortlessly into
every 
gear with the engine running and my foot off the clutch, it pretty much
has 
to be the center ripped out of the clutch or the input shaft is broken
(it 
musta talked to my Spridgets too much). I won't know for sure until it
is 
out and open. Somehow I think I am actually going to pay someone else to
do 
this one... I just can't get excited about pulling an FWD trans... 
David Lieb 

_______________________________________________ 
Support Team.Net http://www.team.net/donate.html 

You are subscribed as cbking@alum.rpi.edu 

http://www.team.net/archive 

http://autox.team.net/mailman/listinfo/spridgets 
. 
        
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>