I prefered the "feel" of the clutch when I used a roller bearing, but it
made just a little more noise at idle with the clutch disengaged. It out
lasted the clutch plate.
David R.
----- Original Message -----
From: "David Booker" <tncarnut1@yahoo.com>
To: "spridget" <spridgets@autox.team.net>
Sent: Thursday, May 21, 2009 8:54 PM
Subject: [Spridgets] Roller vs Carbon t/o bearings
> Anybody have bad stories about roller bearings? The Beck/Arnley Clutch
> kit I
> bought came with a carbon bearing. Should I try to find a roller one?
> I never sit at lights with the clutch in so should a carbon one work fine?
> David Booker
> '71 Midget
> Long Island
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as davriker@nwi.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.12.36/2127 - Release Date: 05/21/09
17:51:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|