spridgets
[Top] [All Lists]

Re: [Spridgets] Hyper Lube

To: "Edward Perez" <eap2140@yahoo.com>, "Larry Daniels"
Subject: Re: [Spridgets] Hyper Lube
From: "Bud Osbourne" <abcoz@hky.com>
Date: Mon, 20 Jul 2009 21:55:04 -0400
Yes.  Remember, this is for break-in, which means that the oil must allow the
rings to seat....which means, basically, to wear themselves to conform to the
shape of the cylinders they are in.  Too much lubrication protection means
that the rings can't wear enough to become "seated".
The break-in oil is not meant to stay in the engine for longer than it takes
to seat the rings.  It's called "break-in" oil for a good reason, so don't use
it for anything but the short, break-in period.
Years ago, when I used to build my own VW engines, I used non-detergent
Kendall 10W, (20W in hot weather) as recommended by world-renowned, air-cooled
VW guru Gene Berg, for the break-in period, which was only a few hundred
miles.  Those engines always gave me 100,000 miles of good service, before I
tore them down for overhaul.  I was always amazed by how little wear I found
after that much mileage, on Kendall (now Brad Penn) oil.
Bud Osbourne
  ----- Original Message -----
  From: Edward Perez
  To: Bud Osbourne ; Larry Daniels ; spridgets@autox.team.net
  Sent: Monday, July 20, 2009 9:39 PM
  Subject: Re: [Spridgets] Hyper Lube


  So Brad Penn's "Break-in" motor oil is SAE 30..... is that OK for the
A-Series?




-----------------------------------------------------------------------------
-
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>