spridgets
[Top] [All Lists]

[Spridgets] FW: BE Fuse block replacement

To: <spridgets@autox.team.net>
Subject: [Spridgets] FW: BE Fuse block replacement
From: <corvallis@peoplepc.com>
Date: Thu, 3 Sep 2009 11:35:59 -0700
-----Original Message-----
From: corvallis@peoplepc.com [mailto:corvallis@peoplepc.com] 
Sent: Thursday, September 03, 2009 11:34 AM
To: 'Paul Asgeirsson'
Subject: RE: [Spridgets] BE Fuse block replacement

NAPA has 12volt 30amp resettable blocks that fit into a fused slot; but then
the cover won't fit ...if you have a cover. I have used one when trouble
shooting. If it trips, I just wait for it to reset and continue. ...bill in
oregon
======================================================
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Paul Asgeirsson
Sent: Thursday, September 03, 2009 11:04 AM
To: James Lempe; spridgets@autox.team.net
Subject: Re: [Spridgets] BE Fuse block replacement

Hi James,

I would NOT fuse the headlights.  If you feel the need to have some
electrical safety device there, use a self resetting circuit type device,
doing each headlight separately.  Driving on a twisty county road at night
with no street lighting, and your headlights go out and stay out, is a
wonderful sphincter exercise!

Later, Paul A
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>