spridgets
[Top] [All Lists]

[Spridgets] 45DM4 Re: still no workie...

To: richb@u.washington.edu, spritenut@comcast.net
Subject: [Spridgets] 45DM4 Re: still no workie...
From: WeslakeMonza1330@aol.com
Date: Thu, 15 Oct 2009 12:31:44 EDT
If it's like the one in the link it's a 45DM4 and needs an ignition  
amplifier.  It's also the case that the pickup inside the distributor can  go 
bad
 
There are books with stuff like this in them.... even with colour  photos.
 
Weslake-Monza 1330
 
In a message dated 15/10/2009 00:45:23 GMT Daylight Time,  
richb@u.washington.edu writes:

I'm not  sure were Ed sourced his vacuum from, I believe it is off the 
carb, 
but I  did pull the vacuum hose off the distributor with no noticeable  
change.  We didn't have a lot of time to work on it last night.   We did 
pull 
the cap off and by a quick glance the advance plate seems to  fine.  We'll 
have to check it out a bit more when we put the timing  light to it.

Here's a smaller, tiny if you will, link to a similar  distributor 
currently 
listed by the same guy Ed bought his  from.
http://tiny.cc/EWACH

Rich Ball
'76 Midget
Everett,  Wa
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>