spridgets
[Top] [All Lists]

Re: [Spridgets] Radiator size

To: Michael Rowe <mdrowe@optonline.net>
Subject: Re: [Spridgets] Radiator size
From: Frank <spritenut@comcast.net>
Date: Wed, 14 Apr 2010 22:47:32 -0400
Michael Rowe wrote:
> There has been discussion of radiator height for a BE bonnet on a SB, which I 
>can't find in the archives.  What alternatives have people used to fit under a 
>BE Bonnet?  

I am using a Geo Metro radiator. It fits, works well, has an electric 
fan, and it was $15 at the junk yard.
Also, Suzuki Swift, and a weird little chevy which looks like the swift 
and metro use the same radiator.
It's a 3 cyl car BUT you need the rad from the automatic tranny model as 
the stick shifts used a slightly taller rad.
I don't know why this is but it is.
I simply crimped off the trans cooler pipes.
Stock downflow bottom hose still works but you need a cross flow top 
hose and it needs to be cut short by about an inch.
I made 2 "L" brackets to hold the metro rad to the Bugeye rad supports, 
I just used the top holes, the bottom of the rad sits nice down between 
the front frame rails.
I also cut off 1 leg of the electric fan support to clear the steering rack.
Nothing has moved and I have had that radiator for about 9 years now.
Pepboys has a universal electric fan switch with a probe that fits in 
the fins of the rad, it also is adjustable.
Mine is set to come on at 170*, I run a 160 stat and with the small 
speedwell grille opening, this works fine.

-- 
Frank Clarici
Toms River, NJ
My own Fleet of Sprites
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>