spridgets
[Top] [All Lists]

Re: [Spridgets] More front wheel bearings

To: Dean Hedin <dlh2001@comcast.net>, Spridgets
Subject: Re: [Spridgets] More front wheel bearings
From: David Lieb <72spridget@gmail.com>
Date: Fri, 13 Aug 2010 21:08:09 -0500
> Normally you can tighten the spindle nut and it can be eliminated
> and then you back it off a bit.

Uh, NO? Unless you have converted to roller bearings and ditched the
spacer, you are supposed to torque that spindle nut to 36 lb-ft for
disk brakes, 55 to 65lb-ft for front drums. If the end float is wrong,
it can be tweaked by "adjusting" the length of the spacer. Not having
the nut correctly torqued down could lead to some significant problems
IMHO.
David L
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>