spridgets
[Top] [All Lists]

Re: [Spridgets] [morris_motors] MM 1000 Rear brake question-

To: Spridgets List <spridgets@autox.team.net>
Subject: Re: [Spridgets] [morris_motors] MM 1000 Rear brake question-
From: Gerard <pixelsmith@gerardsgarage.com>
Date: Sun, 1 May 2011 12:40:22 -0700
I was thinking of the fronts and I erred in the description. The rears  
fit in a slot so the cylinder can slide a little for the parking  
brake. The rubber boot is all the holds them in place.

Gerard

Hi Dave,

If the rear shoes are correct and the Morris has it's original wheel  
cylinders (I know Paul was not a proponent of upgrading the Morris to  
later dual piston wheel cylinders, a la Spridget), the shoes will have  
a notch in one end to accommodate the adjuster. The wheel cylinders  
are held to the backplate with a small bolt (same as the Bugeye). The  
E/C- clips are not for used on MM's. Later Spridget shoes look the  
same , but without the notch, so check that before you start taking  
things apart. I raise that question since you have the clips. Make  
sure you use beehive springs on the shoes to backplate too.

I'd have to see the size of the washer, but it might be part of the  
brake adjuster mechanism at the handbrake. Unlike Spridgets, the  
handbrake uses two cables, one to each wheel, and the adjustment is by  
a special bronze nuts at the handbrake lever.

Gerard


On Apr 30, 2011, at 4:52 PM, Dave KK7SS wrote:

> I have no rear brake action also the handbrake isn't doing its job :0
>
> I ffound that Paul A. had left a set of new shoes in a box on the  
> back seat -- sort of a downer to think that he didn't have the time  
> to fix them.
>
> Anyway, I opened the box and there are 4 new shoes *and* a plastic  
> bag with 3 "C" circlips (looking like an old fashioned 'E')and one  
> thick Bronze washer.
>
> I'm pretty sure I only need to change the shoes BUT what would those  
> three 'C' circlips be for? And the thick Washer?
>
> Are they also for the rear brakes or was he planning on something  
> else !
>
> --
> Dave G  KK7SS
> DN06ig   Richland, WA
>
> '59 Morris Minor 1000
> '65 Sprite - in process
> '76 Midget - shared with my #4 son.
> '06 Honda Civic Hybrid
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
> <*> To visit your group on the web, go to:
>   http://groups.yahoo.com/group/morris_motors/
>
> <*> Your email settings:
>   Individual Email | Traditional
>
> <*> To change settings online go to:
>   http://groups.yahoo.com/group/morris_motors/join
>   (Yahoo! ID required)
>
> <*> To change settings via email:
>   morris_motors-digest@yahoogroups.com
>   morris_motors-fullfeatured@yahoogroups.com
>
> <*> To unsubscribe from this group, send an email to:
>   morris_motors-unsubscribe@yahoogroups.com
>
> <*> Your use of Yahoo! Groups is subject to:
>   http://docs.yahoo.com/info/terms/
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Spridgets] [morris_motors] MM 1000 Rear brake question-, Gerard <=