So it works on the same suck principle as teh Mighty Vac.B Could be your
problem.B I think the most effective are those that push the fluid into the
master by air pressure.B Probably others on here that like the Mighty Vac
system, but I think it sucks, not to use a play on words. 8^)
--David C.
"Those who can, teach. Those who cannot pass laws about teaching."
----- Original Message -----
From: lindalnhvt@nhvt.net
To: dlancer7676@comcast.net
Cc: spridgets@autox.team.net
Sent: Sunday, May 22, 2011 5:24:29 PM
Subject: Re: [Spridgets] brakes*
It's a tube with a fitting on one end to fit over the bleeder valve. B The
other end has a fitting that has a spring inside with a ball to allow
fluid to go out but prevent backflow of air. B It's worked for me before.
Right now, I don't know where I have air in the system.
>
>
> EZ Bleed feeds brake fluid into the system by air pressure doesn't it?CB I
> like that system as opposed to the Mighty Vac type of system that sucks
> the fluid through.CB I bought a Mighty Vac and could never totally get the
> air bubbles out of the lines.CB Not worth a crap.
>
>
> --David C.
> "Those who can, teach. Those who cannot pass laws about teaching."
>
>
>
> ----- Original Message -----
> From: lindalnhvt@nhvt.net
> To: spridgets@autox.team.net
> Sent: Sunday, May 22, 2011 4:55:35 PM
> Subject: [Spridgets] brakes
>
> I just spent quite a while jacking up various wheels and bleeding the
> brakes of my Sprite. Used an EZ bleed and cleared some air and old fluid.
> I had good brake pedal pressure for about 30 seconds and now have
> practically nothing. CB I can get a little braking if I pump a few times,
> but it's dangerous at best..
> I paid a shop to install a new slave cylinder last year and the system
> hasn't been the same since. CB At first the gears were grinding and I had
> them fix it.
> Do I now need to bleed the slave cylinder? CB If so, what's the easiest
> method to get at it.
> Thanks.
> Dick Byrne in NH (where it's been raining for two weeks)
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation CB $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/dlancer7676@comcast.net
>
>
> ----- Original Message -----
> From: lindalnhvt@nhvt.net
> To: spridgets@autox.team.net
> Sent: Sunday, May 22, 2011 4:55:35 PM
> Subject: [Spridgets] brakes
>
> I just spent quite a while jacking up various wheels and bleeding the
> brakes of my Sprite. Used an EZ bleed and cleared some air and old fluid.
> I had good brake pedal pressure for about 30 seconds and now have
> practically nothing. CB I can get a little braking if I pump a few times,
> but it's dangerous at best..
> I paid a shop to install a new slave cylinder last year and the system
> hasn't been the same since. CB At first the gears were grinding and I had
> them fix it.
> Do I now need to bleed the slave cylinder? CB If so, what's the easiest
> method to get at it.
> Thanks.
> Dick Byrne in NH (where it's been raining for two weeks)
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation CB $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/dlancer7676@comcast.net
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|