spridgets
[Top] [All Lists]

Re: [Spridgets] king pin pin removal

To: <spridgets@autox.team.net>
Subject: Re: [Spridgets] king pin pin removal
From: <corvallis@peoplepc.com>
Date: Sun, 24 Jul 2011 18:25:08 -0700
The Brits call it a cotter pin, but it is a tapered pin with a nut on the
other end; like holds a bicycle pedal arm onto the pedal crank, on some
older bicycles. Thank you for your input.
=====================================================================
-----Original Message-----
From: CosmicMag1380 [mailto:cosmicmag1380@gmail.com]
Sent: Sunday, July 24, 2011 6:09 PM
To: corvallis@peoplepc.com
Cc: Spridgets
Subject: Re: [Spridgets] king pin pin removal

On Sun, Jul 24, 2011 at 5:28 PM,  <corvallis@peoplepc.com> wrote:
I'm rebuilding the right front axel assembly. The king pin (called
swivel pin in Bentley's) is held to the fulcrum pin by a small tapered
pin (called a king pin pin in the Mo** parts list.) Anybody had
trouble getting that out? (1979 MG Midget.)   .bill in corvallis
 _______________________________________________

I'm not certain if you are referring to the cotter pin or the fulcrum
pin that you are having trouble with. The cotter pin must be removed.
It is a tapered pin with a nut on the bottom. Dig all the scrunge off
the bottom of the king pin assembly to find the nut. Remove it. Tap
the pin out. Use a hand impact tool with the large flat blade
screwdriver bit on the fulcrum pin. There is a slot in it. Make sure
that the hand impact is set to turn the correct way to undo the pin.
Hold the impact tool correctly with some tension on it and whack it
sharply. I have had very good luck with this method.

--
Kent
1960 Bugeye
1983 Garage full of spridget parts!
2010 Arrow shed full of excess spridget parts!!!
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>