Got the king pin fulcrum pin out.
I tried everything suggested, thank you. Ended up drilling it out.
...bill in corvallis
http://www.97330.com/Disassembly_axle_hub_assembly.html
========================================================
-----Original Message-----
From: Jim Seippel [mailto:aseippel@austin.rr.com]
Sent: Sunday, July 24, 2011 2:53 PM
To: corvallis@peoplepc.com
Subject: RE: [Spridgets] king pin pin removal
I consider the fulcrum pin as a disposable part. Anytime I disassemble the
swivel pin, I always have new fulcrum pins available. That ensures that the
pin will come out without being damaged. I have used the following tools
successfully:
Hammer
Hammer with a punch
Battery terminal puller
Torch to swell the base of the swivel pin surrounding the fulcrum pin
When I order replacement parts, I usually order several extras. :-)
Jim
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of
corvallis@peoplepc.com
Sent: Sunday, July 24, 2011 4:28 PM
To: spridgets@autox.team.net
Subject: [Spridgets] king pin pin removal
I'm rebuilding the right front axel assembly. The king pin (called swivel
pin in Bentley's) is held to the fulcrum pin by a small tapered pin (called
a king pin pin in the Mo** parts list.) Anybody had trouble getting that
out? (1979 MG Midget.) .bill in corvallis
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/aseippel@austin.rr.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|