Rubber mallet always works for me.
Sent from my iPhone
On Mar 19, 2012, at 3:08 PM, "Mark Haynes" <haynes386 at netzero.net> wrote:
> What's the list's combined expertise on removing the thermostat housing
once
> it seems stuck forever? The thermostat on the BE needs changing (it's only
23
> years old at the least), and the aluminum housing doesn't want to budge. I
> don't want to bodge it using a hammer, etc., placing a 3/4" shaft into the
> outlet doesn't help it move, using a gasket scraper and a hammer to try to
get
> under it is of no avail.
>
> The new gas tank is in, and I'm changing out the suspension bumpers in the
> rear after trimming the new ones down an inch (I had 15/16" of unladen
> clearance), and really want to get this taken care of so that I can drive
it
> once the mud is gone!
>
> Mark Haynes
> It only goes one way-Pay it Forward
> HAN6L12977
> HAN5L8016
>
> ____________________________________________________________
> 53 Year Old Mom Looks 33
> The Stunning Results of Her Wrinkle Trick Has Botox Doctors Worried
> http://thirdpartyoffers.netzero.net/TGL3231/4f674c622aad26c16bcst02duc
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/soavero at yahoo.com
|