[Top] [All Lists]

[Spridgets] Fuel & Fuel Additives

Subject: [Spridgets] Fuel & Fuel Additives
From: bonas420 at yahoo.com (stoney bennett)
Date: Mon, 19 Mar 2012 16:54:43 -0700 (PDT)
Thank you for the responses. I decided to go with Premium and no additives for
the first fill up. Unfortunately, my ride got interesting towards the
end...more on that later!

--- On Mon, 3/19/12, Dean Hedin <dlh2001 at comcast.net> wrote:

From: Dean Hedin <dlh2001 at comcast.net>
Subject: RE: [Spridgets] Fuel & Fuel Additives
To: uniquelittlecars at yahoo.com, "'stoney bennett'" <bonas420 at yahoo.com>,
spridgets at autox.team.net
Date: Monday, March 19, 2012, 12:10 AM

I run lead additive.

The way I look at it is they have put hardened seats and better valve
in modern engines for a reason. 

The lead substitute is not very expensive; I think a bottle that treats
20 gallons cost $3.  Two or three of those bottles will do me for a season.

That's not a lot considering what it might avert, valves receding into the
faster wear on the valve guides, etc...

It's not like they are selling the substitute because it doesn't do

I have seen worn valves out of an old 948 engine.  Valve faces do wear and
guides wear faster.  If the additive can help reduce that then I think
it is worth it.   

From: uniquelittlecars at yahoo.com [mailto:uniquelittlecars at yahoo.com]
Sent: Sunday, March 18, 2012 7:27 PM
To: 'stoney bennett'; spridgets at autox.team.net; Dean Hedin
Subject: Re: [Spridgets] Fuel & Fuel Additives

I have run my motor for 7 years with no lead additive.
The guy i bought my car from had it for 10 years - no lead additive.
His dad owned the from 1973 and never ran a lead additive.
I am not sure about the others in the group have experienced.
But my motor is stock and it was just taken apart for a rebuild.
The motor showed no wear on the valves , a little on the mains .
The cylinder walls were so nice they did not need to be bored out.
It was just hit lightly with a hon to clean them up.
I am running stock pistons in the motor again.
So n my opinion the additive is not needed.
If you have a street race motor you may need to harden the seats or run an
I am not sure it is even need with those motors.
I am curious how many people run a lead additive.
I know most people in my area i have talked to say it is not necessary.

<Prev in Thread] Current Thread [Next in Thread>