[Top] [All Lists]

Re: Clutch Return Spring

To: dondaves@ix.netcom.com
Subject: Re: Clutch Return Spring
From: RPalmerBob@aol.com
Date: Sun, 31 Aug 1997 00:45:26 -0400 (EDT)

Use a fairly stiff spring adjusted in length so that it collapses fully just
a bit beyond where the clutch arm motion stops; i.e. just relieves the
pressure on the arm.  This extra free play adds to the pedal play, so you
only want about 1/4" or so of compression of the slave piston past where the
clutch arm stops.


<Prev in Thread] Current Thread [Next in Thread>