tigers
[Top] [All Lists]

Re: front sway bar

To: rpalmer@ames.ucsd.edu, joetiger@mindspring.com
Subject: Re: front sway bar
From: CoolVT@aol.com
Date: Mon, 24 Nov 1997 16:19:53 -0500 (EST)
I believe I stuck something thin through the clamp and mounting holes (an
old, small phillips screwdriver) to allign them.  While the wcrewdriver was
still in place, I had someone squeeze with 16" channel lock pliers.  It went
together very simply.While holding, remove screwdriver and install screw.  

I suppose a "c-clamp" could be used in place of the channel locks if an extra
person is not available.   Mark 

<Prev in Thread] Current Thread [Next in Thread>