tigers
[Top] [All Lists]

Re: Crossmember Bolt Tech Tip

To: Frank Marrone <marrone@wco.com>
Subject: Re: Crossmember Bolt Tech Tip
From: Bill Martin <bmartin@kibo.Stanford.EDU>
Date: Fri, 13 Feb 1998 15:38:45 -0800 (PST)
Hello All,

 I have a supplier for the bolts in question, I am ordering 20 and will
have more info on Tuesday.
Bill

On Wed, 11 Feb 1998, Bill Martin wrote:

> 
>  Frank and All,
> 
>  I have been hunting down longer xmember to frame bolts for a while now 
> and I think I might have found a supplier. As you probably know you can
> buy longer bolts at any hardware store but the grip length is increased 
> not the threaded length. I will let you know in a few days how I do. I
> also have looked at Dave Duncanson's factory ralley car and Tony Eckford's
> LeMans coupe and both have through bolts with washers and Nuts for the 
> crossmember. If the factory did it on race cars then they must have seen
> a reason.
> 
>  To all on this list or who are interested, 
>  I was at Norms last night going through the last of his books and he is
> down to the last 90 copies of The Book of Norman, he printed 1000 and is
> not going to reprint so if your copy is like mine (greasy fingerprints
> throughout) you might want to pick up a copy from Rick at Sunbeam
> Specialties if you want to have a nice copy in your collection.
> Bill
> 
> 
> 


<Prev in Thread] Current Thread [Next in Thread>