tigers
[Top] [All Lists]

Re: Brake Servo Rebuild Questions

To: Wayne Pierzga <w_pierzga@email.msn.com>
Subject: Re: Brake Servo Rebuild Questions
From: Steve Laifman <laifman@flash.net>
Date: Sun, 01 Mar 1998 12:10:49 +0000
Wayne,

Re-building the Girling MkIIA is not an easy task. I hope that you
checked the bore surface of the Vacuum canister, as well as the
hydraulics. One problem I've heard about is that the "kit" has a seal
for the large vacuum piston that is too large, which can cause binding.
The experienced re-builder knows this, and cuts it to the correct length
so it doesn't bind. There probably is too little of the red grease in
the kit. Again, a professional would have a larger supply, and would
slop it up good. The same material is also used in rebuild kits for the
other hydraulics from Girling.

Steve
--
Steve Laifman         < One first kiss,       >
B9472289              < one first love, and   >
                      < one first win, is all >
                      < you get in this life. >


_/_/_/_/_/_/_/
     _/                 _/_/_/       _/_/_/       _/
    _/        _/      _/     _/     _/    _/     _/_/_/_/
   _/        _/       _/    _/      _/  _/      _/
  _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
                         _/
                    _/_/_/



<Prev in Thread] Current Thread [Next in Thread>