Re: Pressure caps and heater cores

[Jim Parent <jparent@yahoo.com>]

If your problem is cooling capacity the solution is simple:

Re:It was suggested on the Tiger list to use a pressure cap of at
least 13
psi, while it was suggested on the Alpine list that a cap of 10 psi or
more
puts the heater core at risk.  Since they are the same heater cores in
both
cars, how does one resolve the conflict?

Get your core rebuilt and strengthened and use a 13psi cap (or
greater).  13 pounds oughta give you a boiling point of around 240-245
degrees F.


Regards,

Jim
B9470139