In a message dated 8/23/00 4:00:08 PM, cmclendon@mindspring.com writes:
> have thought about removing the water pump assembly and then I can bolt
>everything back in place after the radiator is installed. I would appreciate
>some comment from anyone who has successfully accomplished this maneuver,
>or
>just has some good ideas.
>
Cecil,
I don't have that radiator, but I did install a thicker one that has about
1/8 in clearance with the pump shaft. I found a thin piece of cardboard and
slid it between the radiator and fan. Even still, the radiator scratched the
engine compartment paint going in. Good luck.
Rob
|