Thanks for the tip about staining.
There must be two different kinds of Sunbeam wheels out there. There is no
chance the black stripe on my car is a wood product. It was soft and gooey
right after I stripped the wheel. One day later it is hard as can be.
----- Original Message -----
From: "RICHARD TUTTLE JR." <SAMORRY@worldnet.att.net>
Sent: Monday, December 02, 2002 1:50 PM
Subject: steering wheel
> Erich, I agree with Larry it is ebony. If you choose to use epoxy,
> stain and put some finish on the outer part (light color) wood, then put
> epoxy in the missing area. If epoxy gets into the grain of the
> light color wood it will not take stain ever!! After the epoxy sets you
> can sand then put more
> finish on the entire wheel.