Allan,To go along with what Tim said I had a problem with the wheel hitting
the upper control arms.This was traced to the ball joints not being seated
properly due to powdercoating in the bores of the spindles.I cleaned out the
bores and trimmed the control arm where it was hitting.Joe S.
----- Original Message -----
From: "Ronak, TP (Timothy)" <Timothy.Ronak@AkzoNobel.com>
To: <alcon@cox.net>
Cc: "Tiger News Group List (E-mail)" <tigers@autox.team.net>
Sent: Wednesday, April 23, 2003 8:02 PM
Subject: Rubbing sound
> Allan,
> It could be that there is a little deflection in the rim causing it to
> contact the steering arm. Is there ant evidence of contact? The other
thing
> is that the rear tire could be rubbing on a wheel lip with spirited
> handling. If you need to you can shim the arms slightly I would think to
> move them inboard and away from the rim.
>
> Best Regards,
>
> Tim Ronak
> Business Development Manager
> Akzo Nobel Coatings
> Off: (949) 305-5393
> Fx: (425) 955-6268
> Cell: (949) 289-3357
> email: timothy.ronak@akzonobel.com
> VM: (800) 234-6747 ext. 2257#
>
> This message, including attachments, is confidential and may be
privileged.
> If you are not an intended recipient, please notify the sender then delete
> and destroy the original message and all copies. You should not copy,
> forward and/or disclose this message, in whole or in part, without
> permission of the sender.
|