tigers
[Top] [All Lists]

Re: Oil Filter Adapter

To: "Kathy and Erich Coiner" <kathy.coiner@gte.net>,
Subject: Re: Oil Filter Adapter
From: "DrMayf" <drmayf@teknett.com>
Date: Wed, 7 May 2003 16:25:07 -0700
Also, does the adapter not use the same seal as the oil filter? Remove the
filter gasket from a new, cheap, filter install it and attache the adapter
to the block? Ot does it use a real oring?

mayf
----- Original Message -----
From: "Kathy and Erich Coiner" <kathy.coiner@gte.net>
To: "Theodore V. Brown" <tbrown@midcoast.com>; <tigers@autox.team.net>
Sent: Tuesday, May 06, 2003 7:43 PM
Subject: Re: Oil Filter Adapter


> That style filter adapter is used on 1983 and 1989 Ford F250 trucks.  Try
> ordering the block to adapter gasket for these applications.
>
> Erich
>
> ----- Original Message -----
> From: "Theodore V. Brown" <tbrown@midcoast.com>
> To: <tigers@autox.team.net>
> Sent: Tuesday, May 06, 2003 7:50 AM
> Subject: Oil Filter Adapter
>
>
> > Hello All:
> > I've had a one of the right angle adapters for the oil filter (Ford
> > M6880A50) for a while
> > and just have gotten around to trying to fit it to my Tiger.  Jim
Boynton
> > was kind enough to
> > send me a list of the other parts one needs to mount the adapter and
> > therein lies my
> > problem.  It seems that one of the gaskets, C5AZ-6840-A, is no longer
> > available from Ford.
> > For those familiar, it is the large gasket that fits between the block
and
> > the adapter.  Does
> > anyone know where I might find one or is there a substitute that can be
> > used?  Thanks.
> > Tod
> > B382002384LRXFE

<Prev in Thread] Current Thread [Next in Thread>