I assumed the 1984 5.0 Mustang engine had the roller lifters? I'll find out
when I pull the intake soon.
Tom
Is your block fitted with roller lifters? If not, then the B303 (or any
other roller cam) will not work for you...
If you don't have a roller block, then consider either changing to a newer
block or else getting one of Crane's (or others) roller lifter cam kits
for early blocks. You'll have less problems using low-additive oils and make
more power to boot.
Theo
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|