Tod,
Owain is correct, art board or mat board works just fine. I suspect that you
could also use automotive door board but it may be a little stiff. One thing
you may want to think about; some folks have added a very thin (1/8" - 1/4")
piece of foam to the outer side of the cardboard to give the back of the
seat a softer feel.
Good Luck,
JVP
Joseph V. Parlanti
16048 Copen Meadow Dr
North Potomac, Md. 20878
Cell - 301-461-0626
Email - Parlanti@comcast.net
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Tod Brown
Sent: Saturday, March 05, 2011 10:43 PM
To: tigers@autox.team.net
Subject: [Tigers] Tiger Seats
I've been redoing my seats and, so far, have them apart, I would like
to replace the cardboard on the back of the seat frames which is in
pretty sad shape after almost forty-five years. Does anyone have any
advice on what to use and where to get it? My preference would be for
something a bit more moisture resistance than the original cardboard.
Thanks in advance.
Tod
B382002384LRXFE
TAC 864
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|