tigers
[Top] [All Lists]

Re: [Tigers] Brake question

To: Stu Brennan <stubrennan@comcast.net>, "Tigers@autox.team.net"
Subject: Re: [Tigers] Brake question
From: "Smit, Theo" <Theo.Smit@dynastream.com>
Date: Thu, 23 Jun 2011 22:14:37 -0500
I haven't worked on those calipers in a while, but is it possible that the
seals aren't fully seated in the caliper body groove, or that they're somehow
folded the wrong way? They should normally accordion such that they fit flush
or slightly below the piston face.

Good luck,
Theo

> -----Original Message-----
> From: tigers-bounces@autox.team.net [mailto:tigers-
> bounces@autox.team.net] On Behalf Of Stu Brennan
> Sent: June 23, 2011 6:15 PM
> To: Tigers@autox.team.net
> Subject: [Tigers] Brake question
>
> So I'm just finishing up a brake job on the Tiger.  All new rubber bits
> in the master, slaves and calipers.  I got it all back together and
> bled, no leaks yet.  I had to grind down the sides of the pads until
> they fit loosely in the calipers. No surprise there, I've had to do
> this
> on my Subaru, the Buick, etc..  So I know the pads are free vs the
> calipers.  But there is still significant drag on the disks when the
> brakes are off.  The culprits seem to be the outer seals on the
> pistons.
> They bulge up enough that they are pushing on the new pads, causing the
> drag.  The drag is high enough that I suspect that I won't get out of
> town before the disks are glowing red.
>
> Has anyone else encountered this?  Does it go away quickly once they
> heat up the first time?  Has anyone encountered pads that are too
> thick?
> Any ideas out there?  I'll probably drive it for the first time with
> the
> new brakes tomorrow night or Saturday, with a show to go to Sunday...
> And I'd hate to put the old pads back in.
>
> Stu
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/theo.smit@dynastream.com
>
>


This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.

Thank you for your cooperation.
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>