tigers
[Top] [All Lists]

Re: [Tigers] Generator bracket

To: <tigers@autox.team.net>
Subject: Re: [Tigers] Generator bracket
From: "Kirk Smith" <twotigers@verizon.net>
Date: Sat, 10 Sep 2011 12:52:17 -0700
I might be stating the obvious, but the standard Ford generator bracket has
a rectangle or square (depending on year) opening cut in it to facilitate
the dipstick.  The Tiger generator bracket has no such hole, with the
dipstick attached to the front of the Tiger generator bracket.

Kirk

-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Ron Fraser
Sent: Saturday, September 10, 2011 5:11 AM
To: 'RObin Young'; genepadgett@comcast.net
Cc: harryb@elams.org; tigers@autox.team.net
Subject: Re: [Tigers] Generator bracket

Robin
        I don't think there is any confusion; we are just seeking
information about this part.

        I have stated the Tiger generator bracket was ordered by the Ford
Industrial Division and carries a C4JZ part number in the Parts List.   It
is a Tiger specific part with no casting number.  The offset is different
from the stock Ford part to line up the fan belt on the Tiger 260 engine.
The pulleys on the Tiger 260 engine also carry a C4JZ part number which
makes them Tiger specific too.

        This does not mean that a stock Ford Generator bracket could not
work but you would need to space the generator to the rear around 3/4" to
line up the fan belt.   You would also need to look for any hood clearance
issues with the stock Ford bracket.

The casting number for the stock Ford generator bracket is C2OE-10039-H.  If
anyone has a casting number on their Tiger generator bracket; I just ask
that you report the full number and I will investigate that number as best
I'm able.

Ron Fraser

-----Original Message-----
From: RObin Young [mailto:robin02@mindspring.com]
Sent: Friday, September 09, 2011 8:23 PM
To: genepadgett@comcast.net; rfraser@bluefrog.com
Cc: harryb@elams.org; tigers@autox.team.net
Subject: RE: [Tigers] Generator bracket


Ron,  to further add to the confusion.....the bracket off B9471769 has only
a triangle and a 2 stamped on it.  Over the last couple of days, I dipped it
and cleaned many coats of black paint off to find what appears to be a sand
cast texture with no other marks.  Robin Young
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/twotigers@verizon.net
_______________________________________________

tigers@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>