Brent, I used the VB blower motor; it worked.
Tom
;67 Mark 2
On Mon, Dec 1, 2014 at 2:41 PM, Brent Edinger <banana111@msn.com> wrote:
> Ever since the last overhaul and I insulated the car the engine automatic
> heat
> is no longer working.
> For the first time in 35 years the wife made me stop and put the top up
> due we
> were freezing
> coming over grants pass. Not sure I could of made it but I can blame her
> cause
> she was first
> to flinch.
> I took my motor apart and the brass ball bearings were frozen onto the
> shaft.
> I got them off and
> lubed up but I think I want to put a brand new one in there so I'll never
> (yeah right) have to
> mess with it again. Victoria british has one for $90 for the Tiger, I
> think
> I'll give it a try.
>
> Brent
>
> Date: Sun, 30 Nov 2014 23:56:28 -0500
> From: " Ron Fraser" <rfraser@bluefrog.com>
> To: <owain.lloyd@gmail.com>, "'Tom Witt'" <atwittsend@verizon.net>
> Cc: tigers@autox.team.net
> Subject: Re: [Tigers] Tiger blower motor
> Message-ID: <E21E0A85DB6A41E489860898E3563A9D@ronpc1>
> Content-Type: text/plain; charset="us-ascii"
>
> Just remove the shifter boot and you will have a constant flow of
> heat. :)
>
> Generally the problem with the blower motor is that the bushings seize to
> the motor shaft. You can get inside the motor but you need to be a bit
> careful pulling it apart. Remove the bushings from the shaft, clean them,
> soak them in oil, clean the motor shaft, assemble the blower motor.
>
> Ron Fraser
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/tkparker1941@gmail.com
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|