Re: tr3 rock shield in front of rear fender

[Tr3bob@aol.com]

Dave,
When I covered my dash, I applied contact cement to both surfaces. layed a 
large enough piece of vinyl (vinyl without the cloth backing as it's too hard 
to stretch). 
After making a central slit in the glove box cavity, start stretching the 
vinyl into this area. I found that a hair dryer will help. Use some leverage 
and sparingly cut reliefs where needed. 
I admit it took a couple of tries for me to get it right.
Bob Stahlbush
66 MGB GHN3L 78708
60 TR3A TS 81398L