triumphs
[Top] [All Lists]

Re: [TR] installing rubber suspension bushings

To: triumphs@autox.team.net
Subject: Re: [TR] installing rubber suspension bushings
From: don <don@napanet.net>
Date: Sat, 05 Dec 2009 18:03:46 -0800
Try plumber's grease on 'em.  You can get it at a hardware 
store.  It's supposed to not deteriorate rubber parts, but will 
lubricate them.



At 05:05 PM 12/05/2009, Greg Gelhar wrote:
>To All,
>
>Today, a few local Triumph club members got together to install some 
>suspension parts onto a new RatcoTR6 frame. We were trying to 
>install hard rubber bushings into the rear trailing arms and the 
>lower front "A" arms. Long story short, it did not go well. I'm 
>looking for advice as to how others have accomplished this task. I'm 
>not looking for responses telling us we should have used the two 
>piece polyurethane bushings.
>
>
>Greg Gelhar
>1973 TR6
>1980 TR8
>Osseo,MN
>
>_______________________________________________
>
>Support Team.Net  http://www.team.net/donate.html
>
>This list supported in part by the Vintage Triumph Register
>http://www.vtr.org
>
>
>Triumphs@autox.team.net
>http://autox.team.net/mailman/listinfo/triumphs
>
>
>http://www.team.net/archive
>
>
>No virus found in this incoming message.
>Checked by AVG - www.avg.com
>Version: 9.0.709 / Virus Database: 270.14.95/2547 - Release Date: 
>12/05/09 11:41:00

_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>