Randall wrote:
> Alas, the mounting arms are welded to the sidecurtain frame; the only means
> of adjustment is bending. TRF's suggestion is to bend the (stripped) frame
> to fit, and then have it recovered. With the vinyl out of the way, you can
> use a BFH, pipe etc. to help with the adjustment process.
>
Geezzzzz, I hate using the "use a monster hammer to adjust" method!!!
Especially when the arms are thick steel. I guess I'll cut off the
vinyl and look at the connection.
Not happy but wanting side curtains that fit.
Teriann
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|