Mark:
One word of warning: PCV!
The PO had installed Webers on my '74 TR6. Nice. But, the stock PCV system
was eliminated, making for a massive oil leak from the valve cover.
I brewed up my own set up using a '69 TR6 PCV valve and a lot of trips to
the hardware store. It keeps the oil in the engine.
Paul Burr
----- Original Message -----
From: <TR6me@cs.com>
To: <6pack@autox.team.net>
Sent: Friday, March 30, 2001 5:15 PM
Subject: Weber DGV Carbs
> IM getting ready to install a set of weber DGV on my freshly rebuilt
engine.
> I got the carbs second hand and they are excellent condition. for those of
> you listers with these carbs, are there any pitfalls, problems, or helpful
> hints you have so I can get them set up and working well.
>
>
> Mark Johnson
> 72 tr6 (lifting body back on rebuilt frame tomorrow)
|