In a message dated 9/3/2007 11:29:36 A.M. Pacific Daylight Time,
TR250Driver@aol.com writes:
Book says: .625 to .672 or 16 to 17 mm float height
adjustment, both must be the same. I am going to say I have them set on
the high
side now.
Darrell,
I have my ZS's (all 3 of them) set at 17mm and I've never had a
problem.....I think you need into another cause....keeping in mind the old "80%
rule" -
80% of fuel problems turn out to be electrical!
Chip Krout
Delaware Valley Triumphs, Ltd.
Skippack, PA
1976 TR6 CF57822U
************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
|