Bob,
I used a slightly longer bolt, drilled it and used a castle nut with a cotter
pin keeper. Guess you could also wire it.
Lou
-----Original Message-----
From: "Bob Danielson" <75TR6@tr6.danielsonfamily.org>
Date: Mon, 11 Feb 2008 18:16:03
To:"'list Triumph'" <triumphs@autox.team.net>, <6pack@autox.team.net>
Subject: [6pack] Trailing Arm Pivot Bolts
On a TR6 the inner trailing arm pivot bolt is installed with the head toward
the center of the car. The idea being that if the nut should work loose, the
bolt can't work it's way out because the head will hit the frame. Logical...
but a royal pain in the butt for installation and removal of the arms. Has
anyone ever seen, heard or experienced the nuts coming off of the pivot
bolts with the subsequent trailing arm disaster? So what have most of you
done when you've re-installed the arms?
Thanks
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
http://tr6.danielsonfamily.org
Checked by AVG.
Version: 7.5.516 / Virus Database: 269.20.2/1270 - Release Date: 2/10/2008
12:21 PM
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
You are subscribed as lfm614@aol.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|