I don't believe that will work without something to move the outer rail
mounting holes inboard otherwise you are above the frame and there is no clear
path for a bolt. My experience was that adding an adapter plate to achieve
that added pretty much the same bulk as my end state brackets that use the
original seat holes.
Stan
-----Original Message-----
From: 6pack-bounces+stan.foster=hp.com@autox.team.net
[mailto:6pack-bounces+stan.foster=hp.com@autox.team.net] On Behalf Of im
sloane
Sent: Thursday, April 24, 2008 7:59 AM
To: 6pack@autox.team.net
Subject: Re: [6pack] Miata seat bracket
There was a guy at this past weekend's "The Gathering" in NC with Miata seats
with the Mazda rails just bolted to the floor. It sat great and I saw no
problem with a few new holes in the floorpans. If we can find some good
seats,
I think that's what we're gonna do.
Sloane :)
69-Six> Has anyone figured out how to mount the Miata seats so that they are
the same > height as the TR seats? I've got a pair, but haven't installed
because > initial fitting showed that I would be looikng at the windshield
header instead of > through the windshield. I'm 6'2" and need all the head
room I can get! > Joe
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|