Kevin McCormick wrote:
> I'm trying to find a 5mm Allen wrench with at least an 8" length -
> preferably 12" - anyone have a source for this kind of thing? A t-handle
> would be best, but I'm not _that_ picky! This is for an idea I have for
> adjusting Koni compress and turn shocks while still on the car (spring
> compressor not required for the springs, so should be do-able without injury
> :-)
How 'bout a cheap 5mm Allen wrench (or an expensive one for that matter)
cut off at the bend and welded to a piece of steel rod with a "T" bend
at the other end? Or just get a 1/4" drive Allen bit, a 12" extension
and a ratchet.
Of course, an 8" T-handle Allen wrench shouldn't be impossible to find,
either. But you may have to buy a whole set.
--
Loren Williams | Homepage - http://home.kscable.com/shad
'94 Saturn SC2 | Wichita Region SCCA - http://www2.southwind.net/~scca
|