autox
[Top] [All Lists]

RE: Snap-on cordless impact

To: "Alek Tziortzis" <alextz@comm.mot.com>,
Subject: RE: Snap-on cordless impact
From: "Bill Fuhrmann" <bfuhrman@isd.net>
Date: Thu, 21 Oct 1999 22:23:31 -0500
> All of the cordless impacts rate themselves at full charge, so you might
> get 85 ft-lbs on a brand new fresh battery but realistically it is
> probably in the 70's. Not enough to break the lugs loose. Usually I just
> use a T bar and undo the lugnuts 1/4 turn while car is on the ground,
> then the cordless impact can do the rest.

I break them free and then use my LITTLE Ryobi 3/8" drill.  It would easily
do 6 tire changes including the decorative caps that cover the lug nuts.
All for less than $100 and it is light enough that I use it for most things
around the house instead of my 1/2" corded drill.

I use a torque wrench to do the final tightening after I have spun the nuts
back on with the drill.


<Prev in Thread] Current Thread [Next in Thread>