ba-autox
[Top] [All Lists]

Re: Adj Proportioning Valve

To: <kirkm@zeta-idt.com>, <ba-autox@autox.team.net>
Subject: Re: Adj Proportioning Valve
From: "James Creasy" <james@thevenom.net>
Date: Fri, 17 Jan 2003 09:49:08 -0800
kirk,

dont you take the risk of losing all your brakes if there is one failure in
any of the lines?  then you might end up being criminally responsible for
any accident.  a guy in NZ got 4 years in prison cuz a wheel fell off his
modified car and killed a kid.

all of us that drive modified cars are exposed to this risk.  even if you
take your car to a shop, and some kid takes it for a test drive and kills
himself, you could be criminally responsible.

-james

----- Original Message -----
From: "Kirk Meline" <kirkm@zeta-idt.com>
To: "Ben" <BRMcapri@webtv.net>; "James Creasy" <james@thevenom.net>;
<ba-autox@autox.team.net>
Sent: Friday, January 17, 2003 9:26 AM
Subject: RE: Adj Proportioning Valve


> I don't see what the problem is.  Just gut the valve body and put in the
> proportioning valve.  It works great.  You will need to adjust it for rain
> during street driving and racing.  I usually only adjust mine a couple
times
> a year because of different wear in the front and back brake pads.  My
> optimum setting is to get as much brake to the rear during hard braking
> while turning without lockup.  Other than that my brakes have always
> overpowered any race tires so lock up is unavoidable at times.  Good luck.
>
> Kirk
>
>
>
> -----Original Message-----
> From: owner-ba-autox@autox.team.net
> [mailto:owner-ba-autox@autox.team.net]On Behalf Of Ben
> Sent: Thursday, January 16, 2003 5:59 PM
> To: James Creasy; ba-autox@autox.team.net
> Subject: Re: Adj Proportioning Valve
>
>
> James.......
>
>              Is this a street car or a race car?
> I have rework the brakig system in the Capri much like Ed did, it works
> great. If you have a braking problem at speed, pull up on the hand
> brake. : )
>
>                     Ben
>
> DSP #60
> Merc, Capri
>
> Racing is life. All the rest is just waiting.

<Prev in Thread] Current Thread [Next in Thread>