The compressor that I got from Terry is set for 130 lbs., I doesn't appear to
be adjustable. As for the pressure to the doors, Terry recommends adjusting
for a 2 second up time and a 2 1/2 second down time. I don't know what
pressure this is as I don't have a gauge on that side. The pressure also
depends on what size cylinders you have. The originals are a larger diameter
than the replacements and so would take a lower pressure (or is it higher?).
Marvin
#1343
In a message dated 11/30/2001 7:25:05 AM Mountain Standard Time,
AAFS172@aol.com writes:
> In a message dated 11/30/01 5:02:13 AM US Mountain Standard Time,
> Joehrend@bellsouth.net writes:
>
>
> > bricklin@autox.team.net
> >
> My air doors seemed to work alot better, they go up quicker and all the
> way,
> on about 110 psi. Is this bad for the system?
>
> Greg Arend
> Advantage Air
> Flagstaff AZ
///
/// bricklin@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|