John,
The 2000 flywheel bolts are 8mm hex-head, you can get a 3/8" or 1/2" hex
drive to remove these, while you're buying tools pick up a 10mm hex drive
too, you'll need it if you plan on removing the cylinder head.
Todd Osborn
San Jose, CA
2x '68 2L
----- Original Message -----
From: "John Hogan" <mad@madgrizzle.com>
To: "datsun-roadsters" <datsun-roadsters@autox.team.net>
Sent: Saturday, February 16, 2002 3:20 PM
Subject: What size are flywheel bolts?
> I managed to extract the engine and transmission from the car today (I'll
> be d*mned if I let a flu ruin MY three day weekend). However, I ran into
a
> problem trying to get the engine mounted to the engine stand. The
flywheel
> has hex head bolts (type that takes an allen wrench). Any idea what size
> they are? I plan to go out and buy something to take them off (either
> allen wrench or some type of adapter so I can fit my socket wrench on
> it) Any suggestions?
>
> Thanks,
> John
>
>
> John Hogan
> 1967.5 Datsun 2000 SRL311-00141 "Solex"
> www.madgrizzle.com
> SEROC
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Send list postings to datsun-roadsters@autox.team.net
/// datsun-roadsters@autox.team.net mailing list
|