The 1600/2000 manual shows slightly different settings.
Upper ball stud nut 32-40 ft-lbs
Lower ball stud nut 69-90 ft-lbs
-----Original Message-----
From: owner-datsun-roadsters@autox.team.net
[mailto:owner-datsun-roadsters@autox.team.net]On Behalf Of Graeme
Suckling
Sent: Saturday, January 18, 2003 6:04 PM
To: 'Teesun68'; Datsun Roadsters List (E-mail)
Subject: RE: Torque specs for front suspension '69 SRL 2000
Michael and list,
lifted from the SP310 service manual and I assume these values carry
over to later models:-
Upper ball joint nut 15-18 ft-lbs
Lower ball joint nut 16-20 ft-lbs
Spring plate nut 25-30 ft-lbs
Upper arm spindle to cross member 35-42 ft-lbs
Lower link spindle bolt 25-30 ft-lbs
Nut upper ball stud with knockle spindle 43-51 ft-lbs
Nut lower ball stud with knuckle spindle 80-90 -ft-lbs
Spindle nut 30 ft-lbs then back off
1/8 turn
39 deg. C today with much of the Australian Capital Territory
(Canberra) under bushfire threat.
Regards,
Graeme Suckling
1965 SP310 - under construction DSOA Member # 112
1971 P510 4 door - daily driver, original owner, highly modified.
1972 P510 2 door - in storage.
1973 HS30/240Z - re-building to 2003 specs.
Adelaide, South Australia.
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|