Hi Dan,
the '65 SP310 Service Manual with G1500 engine, quotes a valve
clearance of 0.43mm (0.017") hot
or 0.525mm (0.0207") cold for both inlet and exhaust.
I assume the '64 is the same.
Regards,
Graeme Suckling
1965 SP310 - under construction DSOA Member # 112
1971 P510 4 door - daily driver, original owner, highly modified.
1972 PL510 2 door - in storage.
1973 HS30/240Z - re-building to 2003 specs.
www.imagestation.com/mypictures/index.html
Adelaide, South Australia.
-----Original Message-----
From: owner-datsun-roadsters@autox.team.net
[mailto:owner-datsun-roadsters@autox.team.net]On Behalf Of Daniel
Beatty
Sent: Sunday, 18 May 2003 12:05 PM
To: Roadsters
Subject: 1500 value adjustment
Thanks in advance.
What should the 1500's values be set at 15 thousands?
Cheers,
Daniel @ NOWROC
64 SP310
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|