Can you tell me how long that master cylinder is? Length from the
firewall out to the farthest point? Thanks.
Dewey Hahlbohm wrote:
> Eddie, I had a 510 master in my 2000, worked fine until I mounted the Mikuni
>carbs, then the clearance became an issue. The 510 master is longer than the
>roadster master and I was unable to install that way. I had to remove the 510
>master and replace it with a roadster master. Other than that, the 510 master
>worked great. I am not aware of any other clearance issues. Good luck, Dewey
> -----Original Message-----
>> From: Eddie <firstname.lastname@example.org>
>> Sent: Apr 23, 2009 9:18 PM
>> To: Datsun Roadster List <email@example.com>
>> Subject: [Roadsters] Brake Master Cylinder alternatives
>> Hi all,
>> I've checked the 311s site, and there is some info on using a 510 master
>> cylinder in the wiki section. Someone else talked about using a 280Z
>> master cylinder as well.
>> Since I'm not comfortable with the single reservoir system, can anyone
>> tell me what master cylinders work?
>> Are those the only two?
>> What about clearance issues?
>> Support Team.Net http://www.team.net/donate.html
>> You are subscribed as firstname.lastname@example.org
>> Datsun-roadsters mailing list
Support Team.Net http://www.team.net/donate.html
Datsun-roadsters mailing list