Re: Rev Limiter

To:	mjb@cs.utah.edu, fot@autox.team.net
Subject:	Re: Rev Limiter
From:	WEmery7451@aol.com
Date:	Wed, 16 Aug 2000 12:45:55 EDT

In a message dated 8/16/00 9:25:58 AM Pacific Daylight Time, mjb@cs.utah.edu 
writes:

<< I'd suggest a Crane HI-6 ignition module, like the one I have in Killer.
 About $160 from Summit >>

I assume that this rev limiter is also a good choice for the four cylinder 
tractor engines with an early capacitive discharge ignition system (using 
ignition points as the trigger).  Any suggestions will be appreciated.

<Prev in Thread]	Current Thread	[Next in Thread>
Rev Limiter, Joe Curry RE: Rev Limiter, James F. Libecco Re: Rev Limiter, Mark J Bradakis Re: Rev Limiter, Joe Curry Re: Rev Limiter, WEmery7451 <= Re: Rev Limiter, Matthew Wilder Re: Rev Limiter, Joe Curry Re: Rev Limiter, Philip E. Barnes Re: Rev Limiter, Bob Lang Re: Rev Limiter, Mark J Bradakis RE: Rev Limiter, Russ Moore Re: Rev Limiter, Don Marshall Re: Rev Limiter, Joe Curry RE: Rev Limiter, Bill Babcock Re: Rev Limiter, Mark J Bradakis

Previous by Date:	Re: Rev Limiter, Joe Curry
Next by Date:	Re: Rev Limiter, Matthew Wilder
Previous by Thread:	Re: Rev Limiter, Joe Curry
Next by Thread:	Re: Rev Limiter, Matthew Wilder
Indexes:	[Date] [Thread] [Top] [All Lists]