[Top] [All Lists]

RE: Diff Woes

To: "' '" <>,
Subject: RE: Diff Woes
From: Bill Babcock <>
Date: Sat, 27 Nov 2004 20:07:06 -0800
 That's my usual trick. I have some curved bars that I use for that. No go.
I guess I need to find a real spreader. 

-----Original Message-----
To: fot@Autox.Team.Net; Bill Babcock
Sent: 11/27/2004 5:38 PM
Subject: Re: Diff Woes

Put two screw drivers into the cage one opposite to the other and rest
on the housing. Use the lever action to pull the cage out.

----- Original Message -----
From: "Bill Babcock" <>
To: <fot@Autox.Team.Net>
Sent: Sunday, November 28, 2004 2:25 AM
Subject: Diff Woes

> I'm trying to pull my differential from the housing. In the past I've
> able to do this without the factory spreader--it just takes some
> and patience. But this time it won't come out. I suspect that when Mr.
> Yarwood stuck my new LSD in he shimmed it tighter than I usually do. I
> a homemade spreader and tried that, but no go. All I can get it to do
> shift a tiny bit, and that after I looped a cable behind the diff and
> a lever contraption to put a mighty tug on it. Any ideas?

<Prev in Thread] Current Thread [Next in Thread>