[Top] [All Lists]

Re: GT6 rear sway bar

Subject: Re: GT6 rear sway bar
Date: Tue, 28 Jun 2005 22:27:57 EDT
In a message dated 6/28/2005 4:33:28 PM Mountain Standard Time, writes:

> I've been talking about a rotoflex GT6+ with a slightly de-arched
> spring, stock shock mounts (to be relocated to the frame eventually) 
> and Quaife.
> My sense has always been that I am reaching the rebound limit when
> the inner wheel lifts, but I'm not certain. The limit is notoriously
> short on that car. It's possible that more rear roll stiffness would 
> help, and that's why I'll try it. (Someone suggested a Z bar once
> upon a time. Not clear that there's a good way to mount one, or
> that it's the right thing.)
> I did a lot of work once to put a swing spring on, but the spring
> I had couldn't be made to connect to the uprights - the spring was
> either too arched, or just too narrow. Despite several people sitting
> in the rear hatch, we couldn't get the eyes to line up. This was
> the night before leaving for the Seattle VTR convention, and we
> ended up dropping the diff and putting the original spring back on
> that evening, an unexpected extra task... my, that was a long time
> ago!
> chris
Be an organ donor!

Thanks Chris!  Maybe Joe's system will work ...    All the best,  Kev

<Prev in Thread] Current Thread [Next in Thread>