Meant to copy the list too...
>Date: Mon, 02 Jan 2006 12:42:46 -0600
>To: Bill Babcock <BillB@bnj.com>
>From: Tony Drews <email@example.com>
>Subject: Re: Motor Mount
>Cambridge Motorsports sells oversized motor mounts that are the standard
>design but just bigger. A few of us are using them with good success. I
>had to search their site to find it...
>- Tony Drews
>At 11:53 AM 1/2/2006, you wrote:
>>I've got a broken motor mount on Peyote. I sure don't think much if how the
>>stock ones are made--the rubber looks like it was only adhering to a few
>>spots on the plate. For that matter I wouldn't mind something better
>>engineered--with the rubber always in compression instead of shear. Does
>>anyone know of a better one?
=== unsubscribe/change address requests to firstname.lastname@example.org