[Top] [All Lists]

Re: Starters

Subject: Re: Starters
Date: Thu, 5 Jan 2006 09:19:39 EST
Bill Babcock wrote:
> So what's the deal with gear reduction starters. I'm about to chuck my third
> one in three years. Does someone make a better one, or are they a yearly
> recycle item. 
You don't identify your failure mode but I had a lot of trouble with my 
Hitachi? conversion because the solenoid would stick in the tapered cushion 
area of 
the cap.  I finally put silicone grease on the rubber and drilled a 5/16 hole 
to push a screwdriver thru if it stuck.  So far that's settled it.


===  unsubscribe/change address requests to

<Prev in Thread] Current Thread [Next in Thread>