[Top] [All Lists]

Re: Testing Lifters?

To: <>
Subject: Re: Testing Lifters?
From: <>
Date: Fri, 6 Jan 2006 19:58:33 +0100
I agree with bill.
With a domed lifter surface there are two bad effects:

1. You get less spinning of the lifter which rises the wear
2. You reduce the contact surface which rises the pressure and will cause 
oiling problems and wear.


> surface to promote rotation.  Stock ones wear out because they are
> completely flat (sorry Bill, I know this is contrary to one of your
> previous statements).
> Chuck
> Spitfire Racer 

===  unsubscribe/change address requests to

<Prev in Thread] Current Thread [Next in Thread>