[Top] [All Lists]

RE: [FOT] TR3&4 Cam Bearing Bolts Poll

To: <>
Subject: RE: [FOT] TR3&4 Cam Bearing Bolts Poll
From: "Jack W. Drews" <>
Date: Tue, 14 Feb 2006 17:25:14 -0600
Using the large bolt holes in the oil gallery as-is will result in a 
very small opening into the gallery. It can be done but the Accusump 
response will be very slow. I plumbed mine into the gallery at the 
center bolt hole, but drilled and tapped it for a fitting for the 
Accusump hose end.

===  unsubscribe/change address requests to

<Prev in Thread] Current Thread [Next in Thread>