Please note:The Pinion Seal for the TR2-4 has a different OD from the TR4A-6
TR Regards & Happy Thanksgiving,
In a message dated 11/19/2006 2:20:35 PM Pacific Standard Time,
Date: Sun, 19 Nov 2006 12:36:32 -0500
From: "Jerry Van Vlack" <firstname.lastname@example.org>
Subject: [FOT] Seal and Speedi Sleeve NAPA Part Numbers for TR Differentials
This morning I was doing a little housekeeping and I came across a NAPA
Invoice with part numbers that I thought the lists might like to have.
These are for the IRS rear end pinion seal and Speedi Sleeve. I will assume
they are good for all of the TR series cars as I don't believe the seal ever
changed. TR 2 I don't know but it may apply.
Seal is 15207 and Speedi Sleeve is 99149. These are NAPA part numbers but may
interchange with other part houses numbers. Total cost was about $38.00 bucks
The Speedi Sleeve fits over the Flange diameter interface with the pinion
This simple fix cleared up a pesky leak that I had for too many years. As I
recall I needed to remove the IRS Differential to do the repair. You should be
able to do the repair on the car with solid axle cars.
Just a little info on a wet Ohio day.